SMC Networks TigerSwitch SMC6128PL2

F LASH /F ILE C OMMANDS
4-91
Example
The following example shows how to upload the configuration settings to
a file on the TFTP server:
The following example shows how to copy the running configuration to a
startup file.
The following example shows how to download a configuration file:
Console#copy file tftp
Choose file type:
1. config: 2. opcode: <1-2>: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
Console#
Console#copy running-config file
destination file name: startup
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
Console#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#