C
OMMAND
L
INE
I
NTERFACE
4-92
This example shows how to copy a secure-site certificate from an TFTP
server. It then reboots the switch to activate the certificate:
This example shows how to copy a public-key used by SSH from a TFTP
server. Note that public key authentication via SSH is only supported for
users configured locally on the switch:
delete
This command deletes a file or image.
Syntax
delete [unit:] filename
filename - Name of the configuration file or image name.
unit - Stack unit. (Always unit 1)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Console#copy tftp https-certificate
TFTP server ip address: 10.1.0.19
Source certificate file name: SS-certificate
Source private file name: SS-private
Private password: ********
Success.
Console#reload
System will be restarted, continue <y/n>? y
Console#copy tftp public-key
TFTP server IP address: 192.168.1.19
Choose public key type:
1. RSA: 2. DSA: <1-2>: 1
Source file name: steve.pub
Username: steve
TFTP Download
Success.
Write to FLASH Programming.
Success.
Console#
To Next Page
Loading...
Need help?
General
