To Next Page

To Previous Page

Commands Listed in Alphabetical Order

CH<x>:PRObe:

ID? (Query Only)

This query-only command returns the type and serial of the probe that is attached

to the speciﬁed cha nnel. The channel is speciﬁed by x. The value of x can range

from 1 throug

h4.

Group

Vertical

Syntax

CH<x>:PRObe:ID?

Examples

CH2:PROBE:ID? might return :CH2:PROBE:ID:TYPE "10X";SERNUMBE R

"N/A"

, indicating that a passive 10X probe of unknown serial number is attached

to Channel 2.

CH<x>:PRObe:ID:SERnumber? (Query Only)

This query-only command returns the serial number of the probe that is attached

to the speciﬁed cha nnel. The channel is speciﬁed by x. The value of x can range

from 1 through 4.

NOTE. For L evel 0 and 1 probes, the serial n umber will be “N/A”.

Group

Vertical

Syntax

CH<x>:PRObe:ID:SERnumber?

Examples

CH1:PROBE:ID:SERNUMBER? might r eturn :CH1:PROBE:ID:SERNU MBER

"B010289"

, indicating that the serial number of the probe attached to Channel 1

is B010289.

CH<x>:PRObe:ID:TYPe? (Query Only)

This query-only command returns the type of probe that is attached to the

speciﬁed channel. The channel is speciﬁed by x. The value of x can range from 1

through 4. Level 2 (or higher) probes supply their exact product nomenclature; for

Level 0 or 1 probes, a generic ’type string’ of “nnX” is returned.

Group

Vertical

2-118 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DSA70000/B Series Programmer's Manual

Other manuals for Tektronix DSA70000/B Series