Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:DDRMEMORY:CSSOUR CE REF1
sets the chip
select source for DDR memory searches t o reference 1.
SEARCH:SEARC
H1:TRIGGER:A:DDRMEMORY:CSS OURCE?
might return
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:CSSOURCE CH1 indicating the
chip select source for DDR memory searches is channel 1.
SEARCH:SEA
RCH<x>:TRIGger:A:DDRMemory:DATASource
This command sets or queries the data source for a DDR Memory analysis search
to determine where to place a mark. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:DATASource
{CH1|CH2|CH3|CH4|MATH1|MAT H2|MATH3|MATH4|REF1|REF2|REF3|REF4}
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:DATASource?
Arguments
CH<x> specifies one input channel as the search source, where <x> is the channel
number.
MATH<x> specifies the math waveform as the search source, where <x> = 1, 2, 3
or 4.
REF<x> specifies the reference waveform as the search source, where <x> =
1, 2, 3 or 4.
Examples
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:DATASOURCE CH2 sets the DDR
data source to CH2.
SEARCH:SEARCH1:TRIGGER:A:D DRMEMORY:DATASOURCE? might return
:SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:DATASOURCE CH1, indicating
that the DDR data source is set to CH1.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:HYSterisis
This command sets or queries the hysteri
sis percent for DDR memory searches.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:HYSterisis <NR 3>
SEARCH:SEARCH<x>:TRIGger:A :DDRMemory:HYSterisis?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-435

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English