Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:A:RS2
32:BAUD 2000
sets the RS232 triggering baud rate to 2000.
TRIGGER:A:RS232:BAUD? might return :TRIGGER:A:RS232:BA UD 1800,
indicating that the RS232 triggering baud rate is set to 1800.
TRIGger:A:RS232:DATa:LEVel
DPO7000 Series only: This command sets or queries the threshold for the RS232
data source.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:RS232:DATa:LEVel <NR3>
TRIGger:A:RS232:DATa:LEVel ?
Arguments
<NR3> specifies the threshold level with a range of ±
5.0.
Examples
TRIGGER:A:RS232:DATA:LEVEL 0.0 sets the threshold for the RS232 data
source to 0.0.
TRIGGER:A:RS232:DATA:LEVEL ? might return
:TRIGGER:A:RS232:DATA:LEVE L 5.0, indicating that the threshold for
the RS232 data source is set to 5.0.
TRIGger:A:RS232:DATa:SOUrce
DPO7000 Series only: This command sets or queries the RS232 data source.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:RS232:DATa:SOUrc e CH<x>
TRIGger:A:RS232:DATa:SOUrc e?
Arguments
CH<x> specifies the RS232 data source. X can be 1, 2, 3, or 4.
Examples
TRIGGER:A:RS232:DATA:SOURC E C H2 sets the RS232 data source to channel
CH2.
TRIGGER:A:RS232:DATA:SOURC E? might return
:TRIGGER:A:RS232:DATA:SOUR CE CH1, indicating that the RS232 data
source is set to channel CH1.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-577

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English