Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:TYPE RUNT
sets the trigger type setting for
search 1 t o RUNT.
SEARCH:SEARC
H1:TRIGGER:A:TYPE?
might return
:SEARCH:SEARCH1:TRIGGER:A: TYPE EDGE, indicating that the trigger type
setting for search 1 is set to EDGE.
SEARCH:SEA
RCH<x>:TRIGger:A:WIDth:HIGHLimit
This command sets or queries the upper time limit setting for a width trigger
search to determine w here to place a mark. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :WIDth:HIGHLimit <NR3>
SEARCH:SEARCH<x>:TRIGger:A :WIDth:HIGHLimit?
Arguments
<NR3> specifi es the upper time limit in seconds.
Examples
SEARCH:SEARCH1:TRIGGER:A:W IDTH:HIGHLIMIT 400E-12 sets the width
trigger upper time limit setting for search 1 to 0.4 ns.
SEARCH:SEARCH1:TRIGGER:A:W IDTH:HIGHLIMIT? might return
:SEARCH:SEARCH1:TRIGGER:A: WIDTH:HIGHLIMIT 500.0000E-12,
indicating that the width trigger upper time limit setting for search 1 is set to 0.5 ns.
SEARCH:SEARCH<x>:TRIGger:A:WIDth:LOWLimit
This command sets or queries the lower time limit setting for a width trigger
search to determine w here to place a mark. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :WIDth:LOWLimit <NR3>
SEARCH:SEARCH<x>:TRIGger:A :WIDth:LOWLimit?
Arguments
<NR3> specifi es the lower time limit in seconds.
Examples
SEARCH:SEARCH1:TRIGGER:A:W IDTH:LOWLIMIT 400E-12 sets the width
trigger lower time limit setting for search 1 to 0.4 ns.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-479
To Next Page
Loading...
