Commands Listed in Alphabetical Order
Syntax
MARK:CREATE {C
H<x>|MATH<x>|REF<x>|COLUMN}
Arguments
CH<x> creates the mark on a channel waveform, where <x> is the channel number.
MATH<x> creates the mark on the m ath waveform.
REF<x> creates the mark on a reference waveform, where <x> is the reference
waveform number.
COLUMN creates marks on all waveforms in the current zoom pixel column.
Examples
MARK:CREATE CH1 creates a mark on Channel 1.
MARK:DELEte (No Query Form)
This command deletes a mark on a particular waveform, all waveforms in a
column, the selected mark, or all marks.
Group
Search and Mark
Syntax
MARK:DELEte {CH<x>|MATH<x>|SELECTED|REF<x >|ALL|COLUMN}
Arguments
CH<x> deletes the mark on a channel waveform, where <x> is the channel number.
MATH<x> deletes the mark on the math waveform.
SELECTED deletes the mark on the selected waveform.
REF<x> deletes the mark on a reference waveform, where <x> is the reference
waveform number.
ALL deletes all marks on all waveforms.
COLUMN deletes marks on all waveforms in the current zoom pixel column.
Examples
MARK:DELETE CH1 deletes the mark on the Channel 1 waveform.
MARK:FREE? (Query Only)
This query-only command returns how many marks are available for use.
Group
Search and Mark
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-281
To Next Page
Loading...
Need help?
General
