Commands Listed in Alphabetical Order
Group
Waveform Trans
fer
Syntax
DATa:DESTination REF<x>
DATa:DESTination?
Related Commands
CURVe
Arguments
REF<x> is the reference where the waveform will be stored. The reference
number is specified by x, which r anges from 1 through 4.
Examples
DATA:DESTINATION? might return :DATA:DESTINATION REF3, indicating that
reference 3 is the currently selected reference memory location for waveform
data.
DATA:DESTINATION REF1 indicates that incoming waveform data be
stored in reference 1.
DATa:ENCdg
This command sets or queries the format of outgoing waveform data. This
command is equivalent to setting WFMOutpre:ENCdg, WFMOutpre:BN_Fmt,
and WFMOutpre:BYT_Or. Setting the DATa:ENGdg value causes the
corresponding WFMOutpre values to be updated and visa versa.
NOTE. Values are constrained (for outbound data) to the format of the data
specified by DATa:SOUrce.
Group
Waveform Transfer
Syntax
DATa:ENCdg
{ASCIi|FAStest|RIBinary|R PBinary|FPBinary|SRIbinary
|SRPbinary|SFPbinary}
DATa:ENCdg?
Related Commands
WFMOutpre:ENCdg, WFMOutpre:BN_Fmt, WFMOutpre:BYT_Or
2-154 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
