Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
Group
Horizontal
Syntax
HORizontal:DIVisions?
Arguments
None.
Examples
HORIZONTAL:DIVISIONS? might return :HORIZONTAL:DIVISIONS 10.0000,
indicating that the waveform is displayed across ten di
vision.
HORizontal:FASTframe? (Query Only)
This query-only command returns all of the settings for the horizontal FastFrame
commands.
Group
Horizontal
Syntax
HORizontal:FASTframe?
Examples
HORIZONTAL:FASTFRAME? might return :HORIZONTAL:FASTFRAME:STATE
1;READOUTS 0;SUMFRAME NONE;MULTIPLEFRAMES:MODE
OVERLAY;FRAMESTART:CH1 1;CH2 1;CH3 1;CH4 1;MATH1
1;MATH2 1;MATH3 1;MATH 4 1;REF1 1;REF2 1;REF3 1 ;REF4
1;:HORIZONTAL:FASTFRAME:M ULTIPLEFRAMES:NUMFRAMES:CH1
2;CH2 2 ;CH3 2;CH4 2;MATH1 2;MATH2 2;MATH3 2;MATH4 2;REF1
2;REF2 2;REF3 2;REF4 2;:HORIZONTAL:FASTFRAME:LENGTH
500;COUNT 2;SELECTED:CH1 2;CH2 2;CH3 2;CH4 2;MATH 1
2;MATH2 2;MATH3 2;MATH 4 2;REF1 2;REF2 2;REF3
2;REF4 2;:HORIZONTAL:FASTFRAME:REF:SOURCE CH4;FRAME
1;:HORIZONTAL:FASTFRAME:T RACK ALL
.
HORizontal:FASTframe:COUNt
This command sets or queries Fas tFrame frame count. This command is
equivalent to selecting Fast Frame Setup from the Horiz/Acq menu and entering
a value in the Frame Count box. FastFrame captures a series of triggered
acquisitions with minimal intervening time.
Group
Horizontal
2-240 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual