Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:LOW
This command sets or queries the value of the strobe LOW reference level for a
DDR Memory analysis search to determine where to place a mark. You can set
the value onl
y when AUTOREFLEVEL is Custom. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:REFLevel:STROBE:LOW
<NRF>
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:REFLevel:STROBE:LOW?
Related Commands
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:AUTOReflevel
Arguments
<NRF> specifies the value of the strobe LOW reference level in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:STROBE:LOW 1 sets
the strobe LOW reference level to 1.0 volt.
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:STROBE:LOW? might
return
:SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:STROBE:LOW
0.0000
, indicating that the strobe LOW reference level is set to 0 volt.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:STROBE:MID
This command sets or queries the value of the strobe MID reference level for a
DDR Memory analysis search to determine where to place a mark. You can set
the value only when AUTOREFLEVEL is Custom. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:REFLevel:STROBE:MID
<NRF>
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:REFLevel:STROBE:MID?
Related Commands
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:AUTOReflevel
Arguments
<NRF> specifies the value of the strobe MID reference level in volts.
2-440 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English