Commands Listed in Alphabetical Order
TEST:STOP (No
Query Form)
This command (no query form) causes test (or diagnostics) execution to terminate
at the end of the next low-level test. This command is equivalent to selecting
Instrument D
iagnostics from the Utilities menu and then clicking Abort.
Group
Diagnostics
Syntax
TEST:STOP
Related Commands
DIAg:STOP
Examples
TEST:STOP terminates test (or diagnostics) execution at the end of the next
low-level test.
TIME
This command sets or queries the time that the instrument displays. This
command is equivalent to selecting Set Time & Date from the Utilities menu and
then setting the fields in the Time group box.
Gr
oup
Miscellaneous
Syntax
TIME <Q String>
TIME?
Related Commands
DATE
Arguments
<QString> isatimeintheform“hh:mm:ss”wherehhreferstoatwo-digithour
number, mm refers to a two-digit minute number from 01 to 60, and ss refers to a
two-digit second number from 01 to 60.
Examples
TIME “1 4:00:00” sets the time to exactly 2:00 p.m.
TIME? might return :TI ME "14:05:17, indicating the current time is set to
2:05 p.m. and 17 seconds.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-495
To Next Page
Loading...
Need help?
General
