Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
2.0000, indica
ting that the Math 1 waveform window trigger high threshold level
forsearch1issetto2.0volts.
SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:HIGH:REF<x>
This command sets or queries the reference waveform threshold HIGH level for
a window trigger search to determine where to place a mark. <x> is the search
number or reference waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:WINdow:THReshold:HIGH:REF<x>
<NR3>
SEARCH:SEARCH<x>:TRIGger: A:WINdow:THReshold:HIGH:REF<x>?
Arguments
<NR3> specifies the HIGH threshold level.
Examples
SEARCH:SEARCH1:TRIGGER:A: WINDOW:THRESHOLD:HIGH:REF2 1.5000
sets the Reference 2 waveform window trigger high threshold level for search 1
to 1.5 volts.
SEARCH:SEARCH1:TRIGGER:A: WINDOW:THRESHOLD:HIGH:REF1? might
return
:SEARCH:SEARCH1:TRIGGER:A:WI NDOW:THRESHOLD:HIGH:REF1
2.0000
, indicating that the Reference 1 waveform window trigger high threshold
level for search 1 is set to 2.0 volts.
SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:CH<x>
This command sets or queries the channel waveform threshold LOW level for a
window trigger search to determine where to place a mark. <x> is the search
number or channel waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:WINdow:THReshold:LOW:CH<x> <NR3>
SEARCH:SEARCH<x>:TRIGger: A:WINdow:THReshold:LOW:CH<x>?
Arguments
<NR3> specifies the LOW threshold level.
2-484 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual