Commands Listed in Alphabetical Order
Examples
SAVE:WAVEFORM
:FILEFORMAT INTERNAL
specifies that the internal file format
is the format used for saving waveforms.
SAVE:WAVEFOR
M:FILEFORMAT?
might return :SAVE:WAVEFORM:FILEFORMAT
INTERNAL
, indicating that waveforms are saved using the internal format.
*SDS (No Query Form)
This command (no query form) changes the specified setup to reference the
factory setup instead of the specific user setup slot. The content of t he setup slot is
unchanged, but the data will no longer be accessible to you.
This command is equivalent to selecting Delete from the File menu, and then
choosing the specified setup.
Group
Save and Recall
Syntax
*SDS <N R1>
Related Commands
DELEte:SETUp
Arguments
<NR1> specifies a user setup location to delete. Setup storage location values
range from 1 through 10; using an out-of-range value causes an
error.
Examples
*SDS 2 changes setup slot 2 to reference the factory setup.
SEARCH:SEARCH<x>
This command converts the specified search marks to the user marks. <x> can
be 1 to 8.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>
SEARCH:SEARCH<x>?
Examples
SEARCH:SEARCH1 TOUSER converts the Search 1 mark to the user marks.
SEARCH:SEARCH1? might return :SEARCH:SEARCH1 TOUSER, indicating that
all the search1 marks are converted to user marks.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-429
To Next Page
Loading...
Need help?
General
