Commands Listed in Alphabetical Order
*PSC
This command sets and queries the power-on status flag that controls the
automatic power-on handling of the DESER, SRER, and ESER registers. When
*PSC is true,
the DESER register is set to 255 and the SRER and ESER registers
are set to 0 at power-on. When *PSC is false, the current values in the DESER,
SRER, and ESER registers are preserved in nonvolatile memory when power is
shut off and are restored at p ower-on.
Group
Status and Error
Syntax
*PSC {O FF|ON|<NR1>}
*PSC?
Related Commands
DESE, *ESE, FACtory, *RST, *SRE
Arguments
OFF sets the power-on status clear flag to false, disables the power-on clear and
allows the instrument to possibly assert SRQ after power-on.
ON sets the power-on status clear fl ag to true, enabling the power-on status clear
and prevents a ny SRQ ass ertion after power on.
<NR1> = 0 sets the power-on status clear flag to false, disables the power-on clear
and allows the instrument to possibly assert SRQ after power-on; any other value
sets the power-on status clear flag to true, enablin
g the power-on status clear and
prevents any SRQ assertion after power on.
Examples
*PSC 0 sets the power-on status clear flag to false.
*PSC? might return 1 to indicate that the power-on status clear flag is set to true.
*PUD
This command sets or queries a string of Protected User Data. This data is
protected by the PASSWord command. You can modify it only by first entering
the correct password. This password is not necessary to query the d ata.
Group
Status and Error
Syntax
*PUD {< Block>|<QString> }
*PUD?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-413
To Next Page
Loading...
Need help?
General
