Commands Listed in Alphabetical Order
Examples
ZOOM:HORIZONT
AL:SCALE 5
sets the horizontal scale to 5.
ZOOM:HORIZONTAL:SCALE? might return :ZOOM:HOR IZONTAL:SCALE 10,
indicating th
at the horizontal scale is set to 10.
ZOOm:MATH<x>:HORizontal:POSition
This command sets or queries the horizontal position of the specified math
waveform.
Group
Zoom
Syntax
ZOOm:MATH<x>:HORizontal:PO Sition <NR3>
ZOOm:MATH<x>:HORizontal:PO Sition?
Arguments
<NR3> is a value from 0 to 100.00 and is the percent of the waveform that is to the
left of screen center, when the zoom factor is 1× or greater.
Examples
ZOOM:MATH1:HORIZONTAL:POSI TION 50 sets the horizontal position o f the
specified Math 1 waveform to 50.
ZOOM:MATH1:HORIZONTAL:POSI TION? might return
:ZOOM:MATH1:HORIZONTAL:POS ITION 23.9000, indicating that the
horizontal position of the specified Math 1 wave
form is set to 2 3.9.
ZOOm:MATH<x>:HORizontal:SCAle
This command sets or queries the zoom h orizontal scale factor of the specified
math waveform.
Group
Zoom
Syntax
ZOOm:MATH<x>:HORizontal:SC Ale <NR3>
ZOOm:MATH<x>:HORizontal:SC Ale?
Arguments
<NR3> is the amount of expansion in the horizontal direction in 1-2-5 increments.
Examples
ZOOM:MATH1:HORIZ
ONTAL:SCALE 10
sets the horizontal scale factor of the
specified Math 1 waveform to 10.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-651
To Next Page
Loading...
Need help?
General
