Commands Listed in Alphabetical Order
LIMit:LOCk
This command sets or queries whether vertical scaling and positioning affect both
source and template for template comparison pairs.
NOTE. The co
mmand works only if the LT Limit Test option is enabled.
Group
Limit Test
Syntax
LIMit:LOCk {OFF|ON|<NR1>}
LIMit:LOCk?
Arguments
OFF disables the lock feature.
ON enables the lock feature.
<NR1> = 0 disables the lock feature; any other value enables the lock feature.
For queries, a 0 is returned if the lock feature is off; a 1 is returned if the lock
feature is on.
Examples
LIMIT:LOCK ON enables the lock feature so that vertical scaling and positioning
affect both the source and the template for template comparison pairs.
LIMIT:LOCK? might return :LIMIT:LOCK 0, indicating that the lock feature is
disabled.
LIMit:LOG
This command sets or queries whether a log file is saved when the source
waveform data exceeds the test limits.
NOTE. The command works only if the LT Limit Test option is enabled.
Group
Limit Test
Syntax
LIMit:LOG {OFF|ON|<NR1>}
LIMit:LOG?
Arguments
OFF disables saving a log file when the s ource waveform exceeds the test limits.
ON enables saving a log file when the source waveform exceeds the test limits.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-271
To Next Page
Loading...
Need help?
General
