Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:POLarity:MATH<x>
{STAYSHigh|STAYSLow|EIThe r}
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:POLarity:MATH<x>?
Arguments
STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or s tays LOW.
Examples
SEARCH:SEARCH1:TRIGGER:A: TIMEOUT:POLARITY:MATH2 ST AYSLOW sets
the Math 2 waveform timeout trigger p olarity for search 1 to STAYSLOW.
SEARCH:SEARCH1:TRIGGER:A: TIMEOUT:POLARITY:MATH1? might return
:SEARCH:SEARCH1:TRIGGER:A :TIMEOUT:POLARITY:MATH1 S TAYSHIGH,
indicating that the Math 1 waveform timeout trigger po
larity for search 1 is set
to STAYSHIGH.
SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity:REF<x>
This command sets or queries the polarity for a timeout trigger search to determine
where to place a mark. <x> is the search number or reference waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:POLarity:REF<x>
{STAYSHigh|STAYSLow|EIThe r}
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:POLarity:REF<x>?
Arguments
STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity either stays HIGH or s tays LOW.
Examples
SEARCH:SEARCH1:TRIGGER:A: TIMEOUT:POLARITY:REF2 STA YSLOW sets
the Reference 2 waveform timeout trigger polarity for search 1 to STAYSLOW.
SEARCH:SEARCH1:TRIGGER:A: TIMEOUT:POLARITY:REF1? might return
:SEARCH:SEARCH1:TRIGGER:A :TIMEOUT:POLARITY:REF1 ST AYSHIGH,
indicating th
at the Reference 2 waveform timeout trigger polarity for search 1
is set to STAYSHIGH.
2-470 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual