Commands Listed in Alphabetical Order
the Normal colo
r palette is currently selected, which colors traces according to
their channel.
DISplay:COLOr:PALEtte:RECORDView
This command sets or queries the color palette for all record view (non image
view) waveforms.
Group
Display Control
Syntax
DISplay:COLOr:PALEtte:REC ORDView
{NORMal|MONOGREEN|MONOGRA Y|TEMPErature|SPECTral|USEr}
DISplay:COLOr:PALEtte:REC ORDView?
Arguments
NORMal colors traces according to their channel. This is the default color palette.
MONOGREEN colors traces green, emulating a traditional instrument color palette.
MONOGRAY colors traces gray, emulating a monochrome instrument.
TEMPErature colors all traces using a multicolored palette, where “intensity”
is represented by hue; blue for least frequently hit, red for most frequently hit.
All traces share this palette.
SPECTral colors all traces using a multicolored palette, where “intensity” is
represented by hue; red for least frequently hit, blue for most frequently hit. All
traces share this palette.
USEr colors all traces using a user-defined palette. All traces share this palette.
Examples
DISPLAY:COLOR:PALETTE:REC ORDVIEW MONOGRAY sets the palette for all
display types.
DISPLAY:COLOR:PALETTE:REC ORDVIEW? might return
:DISPLAY:COLOR:PALETTE:RE CORDVIEW NORMAL, indicating that
the Normal color palette is currently selected, which colors traces according to
their channel.
DISplay:COLOr:PALEtte:USEr
This command queries the color palette for group settings. It outputs settings
from the DISPlay CARET, CH<x>, GRATICULE, HI STOGRAM, MASK,
MASKHIGHLIGHT, MATH<x>, and REF<x> commands.
Group
Display Control
2-180 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
