Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:RUNT:POLarity:MAT H<x>
This command sets or queries the polarity setting for a runt trigger search to
determine where to place a mark. <x> is the search number or math waveform
number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:RUNT:POLarity:MATH<x>
{EITher|NEGAtive|POSITIVe }
SEARCH:SEARCH<x>:TRIGger: A:RUNT:POLarity:MATH<x>?
Arguments
POSitive places a mark when the rising edge crosses the low threshold and
the falling edge recrosses the low threshold without either edge ever crossing
the high threshold.
NEGative places a mark when the falling edge crosses the high threshold and
the rising edge recrosses the high threshold without either edge ever crossing
the low threshold.
EITher places a mark on a runt of either polarity.
Examples
SEARCH:SEARCH1:TRIGGER:A: RUNT:POLARITY:MATH2 NEGAT IVE sets the
Math 2 waveform runt polarity for search 1 to negative.
SEARCH:SEARCH1:TRIGGER:A: RUNT:POLARITY:MATH1? might return
:SEARCH:SEARCH1:TRIGGER:A :RUNT:POLARITY:MATH1 POSI TIVE,
indicating the Math 1 waveform runt polarity for search 1 is set to positive.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:POLarity:REF<x>
This command sets or queries the polarity setting for a runt trigger search to
determine where to place a mark. <x> is the search number or reference waveform
number.
Group
Search and Mark
Syntax
SEARCH:SEAR
CH<x>:TRIGger:A:RUNT:POLari ty:REF<x>
{EITher|NEGAtive|POSITIVe }
SEARCH:SEARCH<x>:TRIGger: A:RUNT:POLarity:REF<x>?
2-456 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual