Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:WIDTH:POLARITY:M ATH2 NEGATIVE
sets the
Math 2 w aveform width trigger polarity setting for search 1 to NEGATIVE.
SEARCH:SEARC
H1:TRIGGER:A:WIDTH:POLARIT Y:MATH1?
might return
:SEARCH:SEARCH1:TRIGGER:A: WIDTH:POLARITY:MATH1 POSI TIVE,
indicating that the Math 1 waveform width trigger polarity setting for search
1 is set to POSITIVE.
SEARCH:SEARCH<x>:TRIGger:A:WIDth:POLarity:REF<x>
This command sets or queries the polarity for a width trigger search to determine
where to p
lace a mark. <x> is the search number or reference waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :WIDth:POLarity:REF<x>
{NEGAtive|POSITIVe}
SEARCH:SEARCH<x>:TRIGger:A :WIDth:POLarity:REF<x>?
Arguments
NEGAtive specifies a negative polarity.
POSITIVe specifies a positive polarity.
Examples
SEARCH:SEARCH1:TRIGGER:A:W IDTH:POLARITY:REF2 NEGATI VE sets the
Reference 2 waveform width trigger polarity setting for search 1 to NEGATIVE.
SEARCH:SEARCH1:TRIGGER:A:W IDTH:POLARITY:REF1? might return
:SEARCH:SEARCH1:TRIGGER:A: WIDTH:POLARITY:REF1 POSIT IVE,
indicating that the Reference 1 waveform width trigger polarity setting for search
1 is set to POSITIVE.
SEARCH:SEARCH<x>:TRIGger:A:WIDth:WHEn
This command sets or queries the width trigger search to determine where to
place a mark.
<x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :WIDth:WHEn {OUTside|WIThin}
SEARCH:SEARCH<x>:TRIGger:A :WIDth:WHEn?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-481

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English