Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGGER:A:WINDOW:THRESHOLD :LOW:CH2 0.5
sets the
Channel 2 window trigger low threshold level for search 1 to 0.5 volts.
SEARCH:SEARC
H1:TRIGGER:A:WINDOW:THRESH OLD:LOW:CH1?
might
return
:SEARCH:SEARCH1:TRIGGER:A :WINDOW:THRESHOLD:LOW:CH1
800.0000E-3
, indicating that the Channel 1 window trigger high threshold level
for search 1 is set to 0.8 volts.
SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:MATH<x>
This command sets or queries the math waveform threshold LOW level for a
window tr
igger search to determine where to place a mark. <x> is the search
number or math waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :WINdow:THReshold:LOW:MATH<x>
<NR3>
SEARCH:SEARCH<x>:TRIGger:A :WINdow:THReshold:LOW:MATH<x>?
Arguments
<NR3> specifies the LOW threshold level.
Examples
SEARCH:SEARCH1:TRIGGER:A:W INDOW:THRESHOLD:LOW:MATH2 0.5 sets
the Math 2 waveform window trigger low threshold level for search 1 to 0.5 volts.
SEARCH:SEARCH1:TRIGGER:A:W INDOW:THRESHOLD:LOW:MATH1? might
return
:SEARCH:SEARCH1:TRIGGER:A:WI NDOW:THRESHOLD:LOW:MATH1
800.0000E-3
, indicating that the Math 1 waveform window trigger low
threshold level for search 1 is set to 0.8 volts.
SEARCH:SEARCH<x>:TRIGger:A:WINdow:THReshold:LOW:REF<x>
This command sets or queries the reference wa veform threshold LOW level for
a window trigger search to determine where to place a mark. <x> is the search
number or reference waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :WINdow:THReshold:LOW:REF<x> <NR3>
SEARCH:SEARCH<x>:TRIGger:A :WINdow:THReshold:LOW:REF<x>?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-485

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English