Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
ACQuire? (Query Only)
This query-only command returns the following current acquisition parameters:
Stop after
Acquisition state
Mode
Number of envelopes
Number of averages
Number of samples
Sampling mode
Group
Acquisition
Syntax
ACQuire?
Related Commands
ACQuire:MODe, ACQuire:NUMFRAMESACQuired?, ACQuire:NUMAVg,
ACQuire:NUMEnv, ACQuire:STOPAfter
Examples
ACQUIRE? might return the following string for the current acquisition parameters:
:ACQUIRE:STOPAFTER RUNSTOP;STATE 1;MODE SAMPLE; NUMENV
10;NUMAVG 16;NUMSAMPLES 16000;SAMPLINGMODE IT
.
ACQuire:INTERPEightbit
This command sets or queries the interpolation acquisition mode of the instrument.
Group
Acquisition
Syntax
ACQuire:INTERPEightbit {AUTO|ON|OFF}
ACQuire:INTERPEightbit?
Arguments
AUTO lets the instrument automatically select the interpolation acquisition mode.
ON turns on the eight bit interpolation mode.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-75

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English