Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
Related Commands
DIAg:NAMe?, DI
Ag:NAMe:SUBSYS?, DIAg:NAMe:TEST?
Examples
DIAG:NAME:AREA? might return :DIAG:N AME:AREA "Memory" indicating the
selected area name of the current diagnostic test.
DIAg:NAMe:SUBSYS? (Query Only)
This query-only command returns the subsystem of the current diagnostic test.
This command i
s equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Diagnostic Status.
This query-o
nly command can be issued while diagnostics are still in progress.
Group
Diagnostics
Syntax
DIAg:NAMe:SUBSYS?
Related Commands
DIAg:NAMe?, DIAg:NAMe:AREA?, DIAg:NAMe:TEST?
Examples
DIAG:NAME:SUBSYS? might return :D IAG:NAME:SUBSYS "Acquisition",
indicating the subsystem name of the current diagnostic test.
DIAg:NAMe:TEST? (Query Only)
This query-only command returns the name of the c urrent diagnostic test. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Diagnostic Status.
This query-only c ommand can be issued while diagnostics are still in progress.
Group
Diagnostics
Syntax
DIAg:NAMe:TEST?
Related Commands
DIAg:NAMe?, DIAg:NAMe :AREA?, DIAg:NAMe:SUBSYS?
Examples
DIAG:NAME:TEST? might return : DIAG:NAME:TEST
"diagDataFormatConf"
, indicating the test name of the current diagnostic test.
2-170 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual