Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
Syntax
MARK:FREE?
Examples
MARK:FREE? might return :MARK:FREE 1011, indicating there are 1,011 marks
available for use.
MARK:SELected:END? (Query Only)
This query-only command returns the end of the selected mark, 0 to 100% of
the waveform.
Group
Search and Mark
Syntax
MARK:SELected:END?
Examples
MARK:SELECTED:END? might return :MARK:SELECTED:END 93.0000,
indicating that the selected mark is at 93% of the waveform.
MARK:SELected:FOCUS? (Query Only)
This query-only command returns the focus of the selected mark, 0 to 100%
of the waveform.
Group
Search and Mark
Syntax
MARK:SELected:FOCUS?
Examples
MARK:SELECTED:FOCUS? might return :MARK :SELECTED:FOCUS 50.0000,
indicating that the selected mark is at 50% of the waveform.
MARK:SELected:LABel
This command sets or queries the label for the selected mark.
Group
Search and Mark
Syntax
MARK:SELected:LABel <QString>
MARK:SELected:LABel?
2-282 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual