Commands Listed in Alphabetical Order
Examples
HORizontal:FA
STframe:XZEro:SELECTED:REF1?
might return
:HORIZONTAL:FASTFRAME:XZE RO:SELECTED:REF1 35.1000E-12,
indicating that the selected Reference 1 waveform trigger sample occurred 35.1 ps
after the trigger.
HORizontal:MAIn? (Query Only)
This query-only command returns the time per division of the time base. This
command is
equivalent to selecting Position/Scale from the Horiz/Acq menu.
Group
Horizontal
Syntax
HORizontal:MAIn?
Related Commands
HORizontal:MODE:SCAle
Examples
HORIZONTAL:MAIN? might return :HORIZONTAL:MAIN:INTERPRATIO
1.0000;SCALE 40.0000E-9;POSITION 50.0000;SAMPLERATE
1.2500E+9;UNITS:STRING "s"
.
HORizontal[:MAIn]:DELay:MODe
This command sets or queries the time b ase trigger delay mode. This command is
equivalent to choosing Delay Mode On from the Horiz/Acq menu.
Group
Horizontal
Syntax
HORizontal[:MAIn]:DELay:M ODe {ON|OFF|<NR1>}
HORizontal[:MAIn]:DELay:M ODe?
Related Commands
HORizontal[:MAIn]:DELay:TIMe
Arguments
ON enables the time base trigger delay mode.
OFF disables the time base trigger delay mode.
<NR1> = 0 disables the time base trigger delay mode, any other value enables the
time base trigger delay mode.
2-256 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
