Commands Listed in Alphabetical Order
Related Commands
HORizontal:FA
STframe:REF:SOUrce, HORizontal:FASTframe:
TIMEStamp:DELTa:<wfm>?, HORizontal:FASTframe:TIMEStamp:REF?,
HORizontal:FASTframe:TRACk
Arguments
<NR1> specifies the FastFrame reference frame.
Examples
HORIZONTAL:FASTFRAME:REF: FRAME 2 sets the FastFrame reference frame
to 2.
HORIZONTAL:FASTFRAME:REF: FRAME? might return
:HORIZONTAL:FASTFRAME:REF :FRAME 3, indicating that the FastFrame
reference frame is currently set to 3.
HORizontal:FASTframe:REF:SOUrce
This command sets or queries FastFrame Reference waveform source. This is
equivalent to selecting FastFrame Setup from the Horiz/Acq menu and choosing
the reference source.
Group
Horizontal
Syntax
HORizontal:FASTfr
ame:REF:SOUrce <wfm>
HORizontal:FASTframe:REF: SOUrce?
Related Commands
HORizontal:FASTframe:REF:FRAme, HORizontal:FASTframe:
TIMEStamp:DELTa:<wfm>?, HORizontal:FASTframe:TIMEStamp:REF?,
HORizontal:FASTframe:TRACk
Arguments
<wfm> specifi es the FastFrame Reference waveform source. Valid waveforms
include CH<x> and MATH<x> The x variable can be expressed as an integer
ranging from 1 through 4.
Examples
HORIZONTAL:FASTFRAME:REF: SOURCE CH2 sets the hor izontal FastFrame
waveform reference source to Channel 2 .
HORIZONTAL:FASTFRAME:REF: SOURCE? might return
:HORIZONTAL:FASTFRAME:REF :SOURCE CH2, indicating that the
FastFrame waveform source is currently set to Channel 2.
2-244 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
