Commands Listed in Alphabetical Order
MASK:TESt:SA
VEWFM:FILEName
This command sets or returns the name of the directory and file to use with the
MASK:TESt:SAVEWFM command. It defines the directory the files will be put
in (name come
s from date and time).
Group
Mask
Syntax
MASK:TESt:SAVEWFM:FILEName <QString>
MASK:TESt:SAVEWFM:FILEName ?
Related Commands
MASK:TESt:SAVEWFM, MASK:TESt:LOG:FAILure
Arguments
<QString> is a string representing the name of the file to save waveform data to.
Examples
MASK:TEST:SAVEWFM:FILENAME "TEST" sets the file “TEST” as the file to save
waveform data to on failure.
MASK:TEST:SAVEWFM:FILENAME ? might return
:MASK:TEST:SAVEWFM:FILENAM E “C:/TekScope/Waveforms”, indicating
that the directory “C:/TekScope/Waveforms” the files will be put in.
MASK:TESt:SRQ:COMPLetion
This command sets or returns an SRQ on pass/fail test completion mode. When
enabled, this command causes the instrument to send a GPIB SRQ command
when the mask pass/fail test completes.
Group
Mask
Syntax
MASK:TESt:SRQ:COMPLetion {OFF|ON|<NR1>}
MASK:TESt:SRQ:COMPLetion?
Arguments
ON turns on the pass/fail SRQ on completion.
OFF turns o ff the pass/fail SRQ on completion.
<NR1> = 0 turns off the pass/fail SR on completion, any o ther integer turns on the
pass/fail SRQ on completion.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-331
To Next Page
Loading...
Need help?
General
