Commands Listed in Alphabetical Order
Arguments
OFF turns comma
nd batching off.
ON turns command batching on.
<NR1> = 0 turns command batching off; any other value turns command batching
on.
Examples
CMDBATCH OFF disables command b atching.
CMDBATCH? might return :CMDBATCH 1, indicating that command batching is
turned on.
CURSor?
This query-only command returns all of the current cursor settings.
Group
Cursor
Syntax
CURSor?
Examples
CURSOR? might return the following as the current cursor settings:
:CURSOR:STATE 1;FUNCTION VBARS;LINESTYLE SOLID;MODE
INDEPENDENT;SOURCE1 CH1; SOURCE2 CH1;SCREEN:STY LE
LINES; :CURSOR:VBARS:UNITS SECONDS;POSITION1
-1.6000E-6;POSITION2 1.6000E-6; :CURSOR:HBARS:POSITION1
300.0000E-3; POSITION2 -300.0000E-3;UNITS BASE;
:CURSOR:WAVEFORM:POSITION1 -1.6000E-6;POS ITION2 1.6000E-6;
SOURCE2 CH1;UNITS BASE ;STYLE LINE_X;:CURSOR:XY :PRODDELTA
99.1000E+36;PRODUCT1 99.1000E+36;PR ODUCT2 99.1000E+36;
READOUT RECTANGULAR;RADIUS1 99.1000E+36;RADIUS2 99.1000E+36;
RATDELTA 99.1000E+36;RATIO1 99.1000E+36;RATIO2 99.1000E+36;
RDELTA 99.1000E+36;RECTX1 0.0000;RECTX2 0.0000;RECTY1
0.0000; RECTY2 0.0000; THDELTA 99.1000E+36;THETA1
99.1000E+36; THETA2 99 .1000E+36;XDELTA 0.0000;YDELTA 0.0000
.
CURSor:FUNCtion
This command sets or queries the cursor type. Sending this command is
equivalent to selecting Cursor Type from the Cursors menu, and then choosing
from the drop-down list.
Group
Cursor
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-131
To Next Page
Loading...
Need help?
General
