Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:A:CO
MMunication:{AMI|HDB3|B3ZS|B6ZS|B8ZS}:THReshold:HIGH
This entry covers five separate commands, one each for AMI and AMI subtypes.
This command sets or queries the threshold high level.
Conditions
This command is only valid if the instrument has Option MTM is installed
Group
Trigger
Syntax
TRIGger:A:COMMunication:{ AMI|HDB3|B3ZS|B6ZS|B8ZS}:THReshold:
HIGH <N R3>
TRIGger:A:COMMunication:{ AMI|HDB3|B3ZS|B6ZS|B8ZS}:THReshold:
HIGH?
Arguments
<NR3> is the high threshold paramete r expressed in volts.
Examples
TRIGGER:A:COMMUNICATION:A MI:THRESHOLD:HIGH 2.8E-2 sets the
threshold high level to 2.8E-2.
TRIGGER:A:COMMUNICATION:A MI:THRESHOLD:HIGH? might return
:TRIGGER:A:COMMUNICATION: AMI:THRESHOLD:HIGH 2.8E-2, indicating
the threshold high level in volts.
TRIGger:A:COMMunication:{AMI|HDB3|B3ZS|B6ZS|B8ZS}:THReshold:LOW
This entry covers five separate commands, one each for AMI and AMI subtypes.
This command sets or queries the threshold low level.
Conditions
This command is only valid if the instrument has Option MTM is installed
Group
Trigger
Syntax
TRIGger:A:COMMunication:{ AMI|HDB3|B3ZS|B6ZS|B8ZS}:THReshold:
LOW <NR 3>
TRIGger:A:COMMunication:{ AMI|HDB3|B3ZS|B6ZS|B8ZS}:THReshold:
LOW?
Arguments
<NR3>
The high threshold parameter expressed in volts.
2-558 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English