Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
Group
Display Contro
l
Syntax
DISplay:SCREENTExt:LABe
l<x>:NAMe <QString>
DISplay:SCREENTExt:LABel<x >:NAMe?
Related Commands
, DISplay:SCREENTExt:STATE, DISplay:SCREENTExt:LABel<x>:XPOS,
DISplay:SCREENTExt:LABel<x>:YPOS
Arguments
<QString> argument is the text to be displayed for a given label.
Examples
DISPLAY:SCREENTEXT:LABEL2: NAME "THIS IS SCREEN TEXT" sets the
screen text for Label 2 to THIS IS SCREEN TEXT.
DISplay:SCREENTExt:LABEL2: NAME? might return
:DISPLAY:SCREENTEXT:LABEL2 :NAME "MyWaveform", indicating that the
Label 2 screen text is set to MyWaveform.
DISplay:SCREENTExt:LABel<x>:STATE
This command sets the state to be di
splayed for a given label. <x> is the label
number, 1 through 8.
Group
Display Control
Syntax
DISplay:SCREENTExt:LABel<x >:STATE {<NR1>|OFF|ON}
DISplay:SCREENTExt:LABel<x >:STATE?
Arguments
OFF sets the scree n text to not display.
ON sets the screen text to display.
Examples
DISPLAY:SCREENTEXT:LABEL2: NAME ON sets the Label 2 screen text to
display.
DISplay:SCREENTExt:LABEL2: STATE? might return
:DISPLAY:SCREENTEXT:LABEL2 :STATE 1, indicating that the
Label 2 screen tex t display is ON.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-195