Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :PATtern:WHEn
{TRUe|FALSe|LESSThan|MORET han}
SEARCH:SEARCH<x>:TRIGger:A :PATtern:WHEn?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit,
SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:MORELimit
Arguments
TRUe specifies a TRUE logic level.
FALSe specifies a FALSE logic level.
LESSThan specifies the p attern must be TRUE less than the time limit.
MOREThan specifies the pattern must be TRUE more than the time limit.
Examples
SEARCH:SEARCH1:TRIGGER:A:P ATTERN:WHEN TRUE sets the pattern trigger
to trigger when the pattern is TRUE.
SEARCH:SEARCH1:TRIGGER:A:P ATTERN:WHEN? might return
:SEARCH:SEARCH1:TRIGGER:A: PATTERN:WHEN TRUE, indicating search 1
will place a mark when the pattern trigger pattern is TRUE.
SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn:LESSLimit
This command se
ts or queries the time the pattern trigger lesslimit test uses to
determines where to place a mark.
<x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :
PATtern:WHEn:LESSLimit <NR3>
SEARCH:SEARCH<x>:TRIGger:A :PATtern:WHEn:LESSLimit?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:PATtern:WHEn, SEARCH:SEARCH<x>:
TRIGger:A:PATtern:WHEn:MORELimit
Arguments
<NR3> is the time in seconds.
Examples
SEARCH:SEARCH1:TRIGGER:A:P ATTERN:WHEN:LESSLIMIT 1.0 e-9 sets
the less than time limit to 1 ns.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-453

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English