Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:A:I2
C:DATa:LEVel
DPO7000 Series only: This command sets or queries the threshold level for the
I2C data source.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:I2C:DATa:LEVel <NR3>
TRIGger:A:I2C:DATa:LEVel?
Arguments
<NR3> specifies the I2C data level with a range of ±%.0.
Examples
TRIGGER:A:I2C:DATA:LEVEL 0.0 sets the I2C data level to 0.0.
TRIGGER:A:I2C:DATA:LEVEL? might return :TRIGGER:A:I2C:DATA:LEVEL
0.0
, indicating t hat the I2C data l evel is set on 0.0.
TRIGger:A:I2C:DATa:SOUrce
DPO7000 Series only: This comma nd sets or queries the data source for the
I2C serial trigger.
G
roup
Low Speed Serial Trigger
Syntax
TRIGger:A:I2C:DATa:SOUrce CH<x>
TRIGger:A:I2C:DATa:SOUrce ?
Arguments
CH<x> specifies the data source. X can be 1 through 4.
Examples
TRIGGER:A:I2C:DATA:SOURCE CH1 sets the data source for the I2C serial
trigger to channel CH1.
TRIGGER:A:I2C:DATA:SOURCE ? might return
:TRIGGER:A:I2C:DATA:SOURC E CH4, indicating that the data source for the
I2C serial trigger is set on channel CH4.
2-572 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English