Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Trigger
Syntax
TRIGger:{A|B}:LOGIc:STATE?
Related Commands
TRIGger:{A|B}:LOGIc:STATE:INPut:CH<x>, TRIGger:{A|B}:LOGIc:STATE:
WHEn
Examples
TRIGGER:A:LOGIC:STATE? might return
:TRIGGER:A:LOGIC:STATE:INP UT:CH4 RISE;
:TRIGGER:A:LOGIC:STATE:WHE N TRUE
.
TRIGger:{A|B}:LOGIc:STATE:INPut:CH<x>
This command sets or queries the slope for the channel specifiedbyxwhenthe
logic class is set to STATE. This command is equivalent to selecting Logic State
from the Trig menu and then choosing the desired channel input (NEG or POS)
from the Ch drop-down list.
Group
Trigger
Syntax
TRIGger:{A|B}:LOGIc:STATE: INPut:CH<x> {FALL|RISe}
TRIGger:{A|B}:LOGIc:STATE: INPut:CH<x>?
Related Commands
TRIGger:{A|B}:LOGIc:STATE:WHEn
Arguments
FALL specifies the falling edge.
RISE specifies the rising edge.
Examples
TRIGGER:A:LOGIC:STATE:INPU T:CH4 RISE specifies that the A logic trigger
input for Channel 4 is the rising edge.
TRIGGER:A:LOGIC:STATE:INPU T:CH4? might return
:TRIGGER:A:LOGIC:STATE:INP UT:CH4 RISE, indicating that the
A logic trigger input for Channel 4 is the rising edge.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-517

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English