Commands Listed in Alphabetical Order
Group
Trigger
Syntax
TRIGger:STATE?
Related Commands
TRIGger:A:MODe
Returns
ARMED indicates that the instrument is acquirin
g pretrigger information.
AUTO indicates that the instrument is in the automatic mode and acquires d ata
even in the abs ence of a trigger.
DPO indicates that the instrument is in DPO mode.
PARTIAL indicates that the A trigger has occurred and the instrument is waiting
for the B trigger to occur.
READY indicates that all pretrigger information has been acquired and that the
instrument is ready to accept a trigger.
SAVE indicates that the instrument is in save mode and is not acquiring data.
TRIGGER indicates that the instrument triggered and is acquiring the post trigger
information.
Examples
TRIGGER:STATE? might return :TRIGGER:STATE ARMED, indicating that the
pretrigger data is being acquired.
*TST? (Query Only)
This query-only command tests (self-test) the GPIB interface and returns a 0.
Group
Miscellaneous
Syntax
*TST?
Examples
*TST? always returns 0.
UNLock (No Query Form)
This command (no query form) unlocks the front panel. The command is
equivalent to LOCk NONe.
2-624 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
