Commands Listed in Alphabetical Order
Group
Horizontal
Syntax
HORizontal:FASTframe:TRACk {LIVE|ALL}
HORizontal:FASTframe:TRACk ?
Related Commands
HORizontal:FASTframe:REF:FRAme, HORizontal:FASTframe:REF:SOUrce,
HORizontal:FASTframe:SELECTED:SOUrce
Arguments
LIVE sets FastFrame Track to Live.
ALL sets FastFrame Track to All.
Examples
HORIZONTAL:FASTFRAME:TRACK LIVE sets FastFrame Track to live.
HORIZONTAL:FASTFRAME:TRACK ? might return
:HORIZONTAL:FASTFRAME:TRAC K ALL, indicating that all FastFrame Selected
Frames and the FastFrame Reference will be locked together.
HORizontal:FASTframe:XZEro:ALL:CH<x>? (Query Only)
This command queries the time from t he trigger to the start of the specified frames
on the specified channel.
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEro :ALL:CH<x>? <NR1>,<NR1>
Arguments
<NR1> specifies the first and last frame of a range of frames.
Examples
HORIZONTAL:FASTFRAME:XZERO :ALL:CH1? 1,4 might
return
:HORIZONTAL:FASTFRAME:XZERO :ALL:CH1 1,4,"1:
2.5265E-009","2: 3.9010E-010 ","3: 3.8285E-009 ","4:
1.3237E-009"
, giving the first 4 XZERO times for Channel 1.
HORizontal:FASTframe:XZEro:ALL:REF<x>? (Query Only)
This command queries the time from t he trigger to the start of the specified frames
on the specified reference.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-253
To Next Page
Loading...
Need help?
General
