Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEr o:ALL:REF<x>? <NR1>,<NR1>
Arguments
<NR1> specifies the first and last frame of a range of frames.
Examples
HORIZONTAL:FASTFRAME:XZER O:ALL:REF1? 1,3 might
return
:HORIZONTAL:FASTFRAME:XZERO: ALL:REF1 1,3,"1:
2.5265E-009","2: 3.9010E-01 0","3: 3.8285E-00 9"
, giving the first
3XZERO times for Reference 1.
HORizontal:FASTframe:XZEro:FRAme:CH<x>? (Query Only)
This command queries the time from the trigger to the start of the specified frame
on the specified channel.
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEr o:FRAme:CH<x>? <NR1>
Arguments
<NR1> specifi esaframeonthespecified channel.
Examples
HORIZONTAL:FASTFRAME:XZER O:FRAME:CH1? 3 might return
:HORIZONTAL:FASTFRAME:XZE RO:FRAME:CH1 3,3.8285E-9, indicating the
time from the trigger to the start of frame 3 on Channel 1 is 3.83 ns.
HORizontal:FASTframe:XZEro:FRAme:REF<x>? (Query Only)
This command queries the time from the trigger to the start of the specified frame
on the specifi ed reference.
Group
Horizontal
Syntax
HORizontal:FASTframe:XZEr o:FRAme:REF<x>? <NR1>
Arguments
<NR1> specifiesaframeonthespecified reference.
2-254 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English