Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Examples
MASK:COUNT:TE
STS?
might return :MASK:COUNT:TESTS 50, showing 50
testshaveoccurred.
MASK:COUNt:TOTal? (Query Only)
This query-only command returns the sum of all hits in all m ask segments. This
command is the same as MASK:COUNT:HITS? and is kept for compatibility
with other Tektronix instruments.
Group
Mask
Syntax
MASK:COUNt:TOTal?
Returns
<NR1>
Examples
MASK:COUNT:TOTAL? might return :MASK:COUNT:TOTAL50, showing 50 hits
have occurred.
MASK:COUNt:VIOLATIONS? (Query Only)
This query-only command returns the number of test violations that have occurred
in the current pass/fail test. A test violation occurs when any part of a waveform
falls within any mask segment. The default is 0.
Group
Mask
Syntax
MA
SK:COUNt:VIOLATIONS?
Related Commands
MASK:COUNt:TESTS?, MASK:COUNt:TOTal?, MASK:COUNt:
WAVE FO R M S?, MASK:TESt:REPeat
Returns
<NR1>
Examples
MASK:COUNT:VIOLATIONS? might return :MASK:COU NT:VIOLATIONS 50,
showing that 50 test violations have occurred.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-303

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English