Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:TRANsition:THReshold:HIGH:CH<x>
This command sets or queries the threshold high voltage level setting for a
transition trigger search to determine where to place a mark. <x> is the search
number or cha
nnel number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:THReshold:HIGH:CH<x>
<NR3>
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:THReshold:HIGH:CH<x>?
Arguments
<NR3> specifies the HIGH threshold in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH:CH2 1.5
sets the Channel 2 transition trigger HIGH threshold setting for search 1 to
1.5 volts.
SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH:CH1? might
return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH:CH1
2.0000
, indicating that the Channel 1 transition trigger HIGH threshold setting
for search 1 is set to 2 volts.
SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:MATH<x>
This command sets or queries the threshold high voltage level setting for a
transition trigger search to determine where to place a mark. <x> is the search
number or m ath waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:THReshold:HIGH:MATH<x>
<NR3>
SEARCH:SEARCH<x>:TRIGger: A:TRANsition:THReshold:HIGH:
MATH<x>?
Arguments
<NR3> specifies the HIGH threshold in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH:MATH2 1.5
sets the Math 2 waveform transition trigger HIGH threshold s etting for search 1
to 1.5 volts.
2-474 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual