Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
PATtern specifi
es the trigger on a designated arbitrary bit pattern.
LOck specifies the trigger locks a repeating p attern of known length.
Examples
TRIGGER:A:SERIAL:TRIGGERO N PATTERN sets trigger on a designated arbitrary
bit pattern.
TRIGGER:A:SERIAL:TRIGGERO N? might return
:TRIGGER:A:SERIAL:TRIGGER ON LOCK, indicating that the trigger locks a
repeating pattern of known length.
TRIGger:A:SPI:CONDition
DPO7000 Series only: This command sets or queries the trigger condition for
SPI triggering.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:SPI:CONDition {MISO|MOSI|MISOMO SI}
TRIGger:A:SPI:CONDition?
Arguments
MISO specifi es the MISO condition for SPI triggering.
MOSI specifies the MISI c ondition for SPI triggering.
MISOMOSI specifies either the MISO or MISI condition for SPI triggering.
Examples
TRIGGER:A:SPI:CONDITION MOSI sets the SPI trigger condition to MOSI.
TRIGGER:A:SPI:CONDITION? might return : TRIGGER:A:SPI:CONDITION
MISI
, indicating that the SPI trigger condition is set to MISI.
TRIGger:A:SPI:DATa:MISO:ACTIVE
DPO7000 Series o nly: This command sets or queries the SPI MISO polarity.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:SPI:DATa:MISO:A CTIVE {HIGH|LOW}
TRIGger:A:SPI:DATa:MISO:A CTIVE?
2-590 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English