Commands Listed in Alphabetical Order
Examples
RECALL:SETUP F
ACTORY
recalls (and makes current) the instrument setup to its
factory defaults.
RECALL:SETUP
2
recalls the instrument setup from setup storage location 2.
RECALL:SETUP "TEK00000.SET" recalls the setup from the file TEK00000.SET
in the defau
lt directory for setups (C:\TekScope\setups).
RECAll:SETUp:DESKew
This command sets or queries the deskew values that are affected by a default
setup or a recalled setup.
NOTE. This setting is changed only by TekSecure (which resets it to the default
setting of UNLOCK) or through explicit user request (from the Recall S etup dialog
box in th
e TekScope User Interface).
Group
SaveRecall
Syntax
RECAll:SETUp:DESKew {LOCK|UNLOCK}
RECAll:SETUp:DESKew?
Arguments
LOCK a default or a recall setup will not change the deskew settings when this
option is selected.
UNLOCK a default setup will reset the deskew settings to factory values and a recall
setup will apply the setup deskew values to the recalled oscil
loscope state.
Examples
RECALL:SETUP:DESKEW LOCK, a default or recall setup will not change the
deskew settings.
RECALL:SETUP:DESKEW? might return :RECALL:SETUP:DESKEW UNLOCK,
indicating that a default setup will reset t he deskew settings to factory values and
a recall setup will apply the setup deskew values to the recalled oscilloscope state.
RECAll:WAVEform (No Query Form)
This command (no query form) recalls a stored waveform to a reference location.
This command is equivalent to s electing Recall from the File menu, and then
pressing the Waveform button.
Group
Save and Recall
2-416 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
