Commands Listed in Alphabetical Order
SCALE 5 ; :ZOOM:
ZOOM1:CH2:VERTICAL:POSITIO N 0.000; SCA LE
1.0000; :ZOOM:ZOOM1:CH3:HORIZONTAL:POSITI ON50.000; SCALE
5;:ZOOM:ZOOM1:CH3:VERTICAL ...
, indicating the Zoom1 transforms for
all traces.
ZOOm:ZOOM<x>:SCROLLLock
This command sets or queries Scroll Lock for the specified zoom, where x is an
integer fr
om 1 to 4 representing the desired zoom window.
Group
Zoom
Syntax
ZOOm:ZOOM<x>:SCROLLLock {ON|OFF|1|0|<NR1> }
ZOOm:ZOOM<x>:SCROLLLock?
Arguments
ON locks waveforms for the specified zoom window <x>.
OFF unlocks waveforms for the specified zoom window <x>.
<NR1> = 0 unlocks waveforms for the specified zoom window <x>; any other
value locks waveforms for the specified zoom window <x>.
Examples
ZOOM:ZOOM1:SCROLLLOCK ON turns Zoom1 scroll lock on.
ZOOM:ZOOM1:SCROLLLOCK? returns either ON|1 or OFF|0 for Zoom1.
ZOOm:ZOOM<x>:STATE
This command sets or queries the specified zoom on or off, where x is an integer
from 1 to 4 representing the desired zoom window.
Default is Zoom1 on, Zoom2 - 4 off.
Group
Zoom
Syntax
ZOOm:ZOOM<x>:STATE {ON|OFF|<NR1>}
ZOOm:ZOOM<x>:STATE?
Arguments
ON turns Zoom 1-4 on.
OFF turns Zoom 1-4 off.
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-659
To Next Page
Need help?
General
