Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
OC12: NRZ, 622.
1Mb/s
PCIExpress:NRZ,2.5Gb/s
PCIExpress2:NRZ,5.0Gb/s
RIO_2G:NRZ,2.0Gb/s
RIO_500M: NRZ, 500 Mb/s, triggers RIO_DRV500, RIO_EDRV500M, and
RIO_RCV500, 500Mb/s
RIO_750M: NRZ, 750 Mb/s, triggers RIO_DRV750, RIO_EDRV750M, and
RIO_RCV750, 750Mb/s
RIO_1G: NRZ, 1.0 Gb/s, triggers RIO_1G
RIO_SERIAL_1G: NRZ, 1.25 Gb/s, triggers RIO_Serial_1G
RIO_SER
IAL_2_5G
: N RZ, 2.5 Gb/s, triggers RIO_Serial_1G
RIO_SERIAL_3G: NRZ, 3.0 Gb/s, triggers RIO_Serial_1G
SAS6_0: NRZ, SAS6_0
SATA1_5:NRZ,1.5Gb/s
SATA3_0:NRZ,3.0Gb/s
SATA6_0:NRZ,6.0Gb/s
VSRO
C192
: NRZ, 1.2441 G b/s, triggers VSR OC192/STM64
Examples
TRIGGER:A:SERIAL:STANDARD OC1 sets the standard that identifies the code
and bit rate to NRZ, 51.84 Mb/s.
TRIGGER:A:SERIAL:STANDARD? might return
:TRIGGER:A:SERIAL:STANDARD CUSTOM, indicating that the stan
dard that
identifies the code and bit rate is set to NRZ, 155.5 Mb/s.
TRIGger:A:SERIAL:TRIGgeron
This command sets or queries the trigger on a designated arbitrary bit pattern or
lock on a repeating pattern of known length.
Group
Low Speed Serial Trigger
Syntax
TRIGger:A:SERIAL:TRIGgeron {PATtern|LOck}
TRIGger:A:SERIAL:TRIGgeron ?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-589