Tektronix DSA70000/B Series Programmer's Manual

Commands Listed in Alphabetical Order
SEARCH:SEARCH
1:TRIGGER:A:TRANSITION:THRES HOLD:HIGH:MATH1?
might return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH:MATH1
2.0000
, indicating that the Math 1 waveform transition trigger HIGH threshold
setting for search 1 is set to 2 volts.
SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:HIGH:REF<x>
This comma
nd sets or queries the threshold high voltage level setting for a
transition trigger search to determine where to place a mark. <x> is the search
number or reference waveform number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:HIGH:REF<x>
<NR3>
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:HIGH:REF<x>?
Arguments
<NR3> specifies the HIGH threshold in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A:T RANSITION:THRESHOLD:HIGH:REF2 1.5
sets the Reference 2 waveform transition trigger HIGH threshold setting for
search 1 to 1.5 volts.
SEARCH:SEARCH1:TRIGGER:A:T RANSITION:THRESHOLD:HIGH:REF1?
might return
:SEARCH:SEARCH1:TRIGGER:A: TRANSITION:THRESHOLD:HIGH:REF1
2.0000
, indicating that the Reference 1 waveform transition trigger HIGH
threshold setting for search 1 is set to 2 volts.
SEARCH:SEARCH<x>:TRIGger:A:TRANsition:THReshold:LOW:CH<x>
This command sets or queries the threshold low voltage level setting f or a
transition trigger search to determine where to place a mark. <x> is the search
number o r channel number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:LOW:CH<x>
<NR3>
SEARCH:SEARCH<x>:TRIGger:A :TRANsition:THReshold:LOW:CH<x>?
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-475

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English