Commands Listed in Alphabetical Order
DISplay:COLO
r:PALEtte:USEr:WAVEform
This command sets or queries the user palette waveform colors. It assigns the
hue-lightness-saturation (HLS) triplet to be used for the specified waveform for
the user pale
tte.
Group
Display Control
Syntax
DISplay:COLOr:PALEtte:USE r:WAVEform
{HLS|TEMPErature|SPECTral }
DISplay:COLOr:PALEtte:USE r:WAVEform?
Arguments
HLS sets the color of user waveforms to the hue, lightness, and saturation specified
by the DISplay:COLOr:PALEtte:USEr:<wfm> commands.
TEMPErature sets the color of user waveforms to temperature.
SPECTral sets the color of user waveforms to spectral.
Examples
DISPLAY:COLOR:PALETTE:USE R:WAVEFORM SPECTRAL sets the user
waveforms color palette to spectral.
DISPLAY:COLOR:PALETTE:USE R:WAVEFORM? might return
:DISPLAY:COLOR:PALETTE:US ER:WAVEFORM TEMPERATURE, indicating that
the color of user waveforms is set to temperature.
DISplay:COLOr:REFCOLOr
This command sets o r queries the color to be used for reference traces, either in
the standard palette’s nominal REF color or according to the color of the s ource
waveform. This command is equivalent to selecting Display Setup from the
Display menu and then choosing the Colors tab.
Group
Display Control
Syntax
DISplay:COLOr:REFCOLOr {DEFAULT|INHERIT}
DISplay:COLOr:REFCOLOr?
Related Commands
DISplay:INTENSITy:WAVEform:IMAGEView, DISplay:INTENSITy:
WAVEform:RECORDView
2-186 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
