Commands Listed in Alphabetical Order
TRIGger:A:VI
Deo:STANdard
DPO7000 Series only: This command se ts or queries the video standard.
Group
Trigger
Syntax
TRIGger:A:VIDeo:STANdard
{BILevelcustom|TRILevelcu stom|NTSc|PAL|
SECAM|HD480P60|HD576P50|H D875I60|HD720P30|HD720P50|
HD720P60|HD1080I50|HD1080 I60|HD1080P24|
HD1080P25|HD1080P30|HD108 0P50|HD1080P60| HD1080SF24}
TRIGger:A:VIDeo:STANdard?
Arguments
BILevelcustom argument sets the instrument to use custom video parameters
that you set with the TRIGger:A:VIDeo:CUSTom:SYNCInterval command.
TRILevelcustom argument sets the instrument to use custom video horizontal
scan rate parameters that you set with the TRIGger:A:VIDeo:CUSTom:
LINEPeriod command.
NTSc argument sets the instrument to trigger on video signals that meet the NTSC
525/60/2:1 standard (a line rate of 525 lines per frame and a fieldrateof60Hz).
PAL argument sets the instrument to trigger on video signals that meet the NTSC
625/50/2:1 standard (a line rate of 625 lines per frame and a fieldrateof50Hz).
SECAM argument sets the instrument to trigger on video signals that meet the
SECAM standard.
HD480P60 argument sets the instrument to trigger on the HDTV 480/60
progressive format.
HD576P50 argument sets the instrument to trigger on the HDTV 576/50
progressive format.
HD875I60 argument sets the instrument to trigger on the HDTV 875/60 format.
HD720P30 argument sets the instrument to trigger on the HDTV 720/30
progressive format.
HD720P50 argument sets the instrument to trigger on the HDTV 720/50
progressive format.
HD720P60 argument sets the instrument to trigger on the HDTV 720/60
progressive format.
HD1080I50 argument sets the instrument to trigger on HDTV 1080/50 interlaced
format.
HD1080I60 argument sets the instrument to trigger on HDTV 1080/60 interlaced
format.
2-606 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
