Commands Listed in Alphabetical Order
Syntax
ZOOm:ZOOM<x>:
<wfm>:HORizontal:TIMEPositio n <NRF>
ZOOm:ZOOM<x>:<wfm>:HORizo ntal:TIMEPosition?
Arguments
<NRF> specifies the horizontal position in time from the trigger.
Returns
ZOOM:ZOOM1:<wfm>:HORIZONT AL:TIMEPOSITION 1e-9 sets the Zoom1
reference pointer at 1 ns in t he acquired waveform.
ZOOm:ZOOM<x>:<wfm>:VERTical:POSition
This command sets or queries the vertical position of the specified waveform for
the specified zoom, where x is an integer from 1 to 4 repres enting the desired
zoom window. The setting of the ZOOm:ZOOM<x>:SCROLLLOCk command
determines the waveforms that are affected. The <wfm> can be a channel, math,
or reference w aveform.
Group
Zoom
Syntax
ZOOm:ZOOM<x>:<wfm>:VERTic al:POSition <NR3>
ZOOm:ZOOM<x>:<wfm>:VERTic al:POSition?
Arguments
<NR3> is the vertical position, expressed in divisions.
Examples
ZOOM:ZOOM1:CH1:VERTICAL:P OSITION 2 sets the Zoom1 vertical position to
2, which centers the zoom trace at the second division of the acquired trace.
ZOOM:ZOOM1:CH1:VERTICAL:P OSITION? might return
:ZOOm1:CH1:VERTical:POSit ion 0.0000, indicating that the
Zoom1 trace for Channel 1 is centered at division 0 of the acquired trace.
ZOOm:ZOOM<x>:<wfm>:VERTical:SCAle
This command sets or queries the zoom vertical scale of the specified waveform
for the specifiedzoom,wherexisanintegerfrom1to4representingthedesired
zoom window.
Group
Zoom
Syntax
ZOOm:ZOOM<x>:<wfm>:VERTic al:SCAle <NR3>
ZOOm:ZOOM<x>:<wfm>:VERTic al:SCAle?
2-662 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
