Tektronix DSA70000/B Series

Commands Listed in Alphabetical Order
|SFI5_XMITADA
TA2|SFI5_XMITCDATA2|SFI5_XMI TACLK2
|SFI5_XMITCCLK2|SFI5_RCVB DATA2|SFI5_RCVDDATA2
|SFI5_RCVBCLK2|SFI5_RCVDC LK2|SFI5_XMITADATA3
|SFI5_XMITCD
ATA3|SFI5_XMITACLK3|SFI5_X MITCCLK3
|SFI5_RCVBDATA3|SFI5_RCVD DATA3|SFI5_RCVBCLK3
|SFI5_RCVDCLK3|PCIEXPRESS _Xmit|PCIEXPRESS_Rcv
|SAS1_5_IR|S
AS1_5_CR|SAS1_5_XR|SAS1_5_ IR_AASJ
|SAS1_5_CR_AASJ|SAS1_5_XR _AASJ|SAS1_5_SATA
|SAS3_0_IR|SAS3_0_CR|SAS3 _0_XR|SAS3_0_IR_AASJ
|SAS3_0_CR_A
ASJ|SAS3_0_XR_AASJ|SAS3_0_ SATA
|STM0_1|STM0_0|STM0_HDBX| STM1E_0|STM1E_1|STS1Pulse
|STS1Eye|STS3|STS3_Max|TF I5_2|TFI5_3
|USERMask|V
IDEO270|VIDEO292M|VIDEO360| VSROC192}
MASK:AUTOSet:STANdard?
Arguments
ATATXG1 (Serial ATA, G1 Tx, 1.5 Gb/s)
ATATXG2 (Serial ATA, G2 Tx, 3.0 Gb/s)
ATATXG3 (Serial ATA, G3 Tx).
ATARXG1 (SerialATA,G1Rx1.5Gb/s)
ATARXG2 (Serial ATA, G2, Rx, 3.0 Gb/s)
ATARXG3 (Serial ATA, G3, Rx)
G703D1 (ITU-T, G703 (10/98), DS1 Rate, 1.544 Mb/s)
DS1 (ANSI T1.102-1993 (R1999), DS1, 1.544 Mb/s)
DS1A (ANSI T1.102-1993 (R1999), D
S1A, 2.048 Mb/s)
DS1C (ANSI T1.102-1993 (R1999), DS1C, 3.152 Mb/s)
DS2 (ANSI T1.102-1993 (R1999), DS2, 6.312 Mb/s)
DS3 (ANSI T1.102-1993 (R1999), DS3, 44.736 Mb/s)
DS4NA (ANSI T1.102-1993 (R1999), DS4NA, 139.26 Mb/s)
DS4NA_Max (ANSI T1.102-1993 (R1999), DSNA Max Output, 139.26 Mb/s)
DS2RATECoax (ITU-T, G703 (10/98), D2 Rate Coax, 6 .312 Mb/s)
DS2RATESymmetrical (ITU-T, G703 (10/98), D2 Rate Sym, 6.312 Mb/s)
E1Coax (ITU-T, G703 (10/98), E1 Coax Pair, 2.048 Mb/s)
E1Symmetrical (ITU-T, G703 (10/98), E1 Sym Pair, 2.048 Mb/s)
E2 (ITU-T, G703 (10/98), , 8.448 Mb/s)
RATE32Mbit (ITU-T, G703 (10/98), 32.064 Mb/s)
E3 (ITU-T, G703 (10/98), E3, 34.368 Mb/s)
2-292 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual