What’s New with Pocket-3D
P/N 7010-0628
xiii
more information.
NOTE: When using an RS1 radio on the FC_250, you must select
COM3 for the radio port in the configuration. The port is not labeled
‘radio’ but it is the only port available for RS1 communication.
NOTE: Due to an increase in program size, we recommend users do
NOT use any data files over 2MB in Pocket-3D. This DOES NOT
mean that you cannot use data files over 2MB, but you should be
aware that issues could arise if you go over this limit.
The following list briefly describes the features and functions for
version 9.0 of Pocket-3D.
Auto-topo improvements – Improvements have been
made to the management of very large topo survey data sets and
to auto-topo logging at high speed (up to 5 points per second).
User Interface – Screen colors and fonts have been
enhanced to improve visibility in sunlight and to achieve a more
modern look and feel.
• Buttons now have 3D edges.
Menu items, surface, and equipment lists now have descriptive
bitmaps.
To Next Page
Loading...
