Survey Menu
Pocket-3D Reference Guide
4-16
If these values are exceeded, the GPS/mmGPS sensor button will turn
orange and flash. Also, no measurement will be taken in auto topo
mode if the entered values are over the limit.
Figure 4-24. Roving Options
On the Site-Link tab, check mark the box below to send a toposhot
to a Site-link client (
Figure 4-25), then press Ok.
Figure 4-25. Site-Link Options
Auto-topo/Stop Auto-topo
Used in 3D GPS+ applications, the Auto-topo/Stop auto-topo feature
in Pocket-3D performs “on the fly” topographic surveys of an entire
project, or any portion thereof.
To Next Page
Loading...
