Topcon Pocket-3D - Importing;Exporting Linework Files Via Site-Link

Importing/Exporting Linework Files
P/N 7010-0628
2-61
Importing/Exporting Linework
Files Via Site-Link
To Import/Export surface files via Site-Link, do the following:
1. Press DataLineworkImport/ExportVia Site-Link
(
Figure 2-83 on page 2-61).
Figure 2-83. Import/Export Linework Files
2. On the Linework(s) dialog box, select None, All Polylines,
Selected Polylines only or select a layer from the Polylines by
layer drop-down list to import (
Figure 2-84 on page 2-62).
3. Press Next to continue.
4. On the import linework To: dialog box (Figure 2-84 on page 2-
62), highlight a file to select it and press Next.